联系方式CONTACT

Add:(台湾高新工業股份有限公司)

台湾桃园县八德市建國路92巷23号

开发部:上海市嘉定区联西开发区创业园A区

市场部:上海市普陀区李子园商务区

Tel: 021-36361038021-36361032

www.

      

LED专用温湿度控制机


格:TH-LED

准:GB2423,IEC168

材质:不锈钢钣(SUS#304)并施于环氧树脂涂装。

控制精度:温度:±0.3℃;湿度:±2.5%R,H。

适用范围:测试各种金属材料及LED制品,在自然或人工环境下,各种温度和湿度之相互变化,用来评定产品在预期使用条件的工作能力及在实际上储存、运输和使用状况其性能评价。

可程式/经济型恒温恒湿/高低温试验机
PROGRAMMABLE/CHEAP TEMPERATURE & HUMIDITY/HIGH LOW TEMPERATURE CHAMBER
     1.箱体采用CNC数位工作母机成型,圆弧造型美观大方,并采用平面无反作用把手,操作容易。
2.箱体内外部材质采用不锈钢(SUS#304),外部更施於环氧树脂涂装,以增加外观质感及洁净度。
3.补水箱置控制箱体前侧的下部,外拉式水箱的设计,更便利操作补充水源。
4.大型观测视窗附照明保持箱内明亮,且利用发热体内嵌式玻璃,随时堡持清晰的观测箱内的状况。
5.加湿系统管路欤控制电路板之间增设集水盘,可避免因管路漏水影响电路,提高安全性。
6.箱体堡温层采用高强度PU发泡树脂欤高密度之玻璃纤维棉,厚度10公分可避免不必要之能量损失。
7.箱体左侧具一直径50mm之测试孔,可供外接测试电源线或信号线使用。
 可程控制器  1.采用HONEYWELL IPC-1000超感度液晶(LCD)显示触控式荧幕画面,荧幕操作简单,程式编辑容易。
2.控制器操作界面设中、英、韩三国文字可供选择,且即时运转之曲线图可由荧幕显示。
3.具有30组程式800段999CYCLE步骤之容量,每段时间设定最大99小时59分。
4.具有10组程式串,每串可联结6组程式,每组程式中最多可设定5组副程式做循环。(999次)
5.资料及试验条件输入后,控制器具有荧幕Lock锁定功能,避免人为触摸而停机。
6.具有P.I.D自动演算功能,可将温湿度变化条件立即修正,而使温湿度之控制更为精确稳定。
7.具有RS-232通讯界面及连线软件,可于电脑上设计程式、监视试验过程并执行开关机等功能。
8.具有9点故障讯息显示,于运转中发生异常状况,即刻切断电源,并于荧幕上即时显示故障原因。
9.具有4组时序讯号接点,可使运转过程中,对外输出控制接点,提供使用者进行动态试验。(选配)
10.可提供温湿度线性直流信号输出至温湿度记录器,以了解测试条件之状态,进而提高检测信赖度。
 冷冻及风跃系统  1.冷冻机采用法国原装进口铁甲武士压缩机,并使用环保冷煤(R134a、R404a、R23)
2.冷冻系统采用二元式低温回路系统设计,并于不同温域采用不同压缩机作功,翠增加设备使用寿命。
3.利用多翼式送风机强力送风循环,避免任何死角,可使测试区内温湿度分布均匀。
4.风路循环采用侧吹出风回风设计、风压、风速皆符合试验标准,并可使闸门瞬间温湿度回稳时间快
5升湿、降温、加湿、除湿系统完全独立可提高效率,降低测试成本,增长寿命,减低故障率。
 选购配件  1.隔层架     (SHELVES)
2.测试孔     (CABLE PROT)
3.液态氮喷射装置 (LIQUID N2 INJECTION)
4.自动补水系统  (WATER SUPPLY SUBSYSTEM)
5.低湿除湿系统   (LOW HUMIDITY DEHUMIDIFIER)
6.纯水处理装置    (REVERSE OSMOSIS WATER PURIFIER)
7.温湿度记录器    (TEMPERATURE AND HUMIDITY RECORDER)
                             
型号 TH/WCT-1P(S)-A(B,C,D,E) TH/WCT-2P(S)-A(B,C,D,E) TH/WCT-3P(S)-A(B,C,D,E) TH/WCT-4P(S)-A(B,C,D,E)
测试区尺寸 45×60×45 50×75×60 80×80×80 100×100×100
Internal Dim.
外型尺寸 108×145×80 113×160×95 143×165×115 163×185×135
External Dim.
工作温度范围 100℃(+150℃)~-70℃(A:0℃、B:-20℃、C:-40℃、D:-60℃、E:-70℃
Temp. Range
相对湿度范围 20%~98%R.H.
Relative humidity Range
Features 机器性能 解析精度 TH-P:温度0.01℃,温度0.1%R.H.:TH-S/WCT-P/WCT-S:温度0.1℃,温度0.1%R.H.
Indication Resolution TH-P:Temp.0.1℃,Humi.0.1%R.H.:TH-s/wct-P/wct-s:Temp.0.1℃,Humi.0.1%R.H.
控制精度 温度:±0.3℃;温度:±2.5%R.H.
Temp.& Humi.Constancy Temp.:±0.3℃;Humi.:±2.5%R.H.
升温时间 100 100 100 100
Heat-up time min 35 40 50 50
降温时间 0 -20 -40 -60 -70 0 -20 -40 -60 -70 0 -20 -40 -60 -70 0 -20 -40 -60 -70
Pull-down time min 30 45 50 60 90 30 45 50 60 90 30 45 50 60 100 30 45 50 60 120
Material 材质 外部材质 SUS#304不锈钢板+粉体涂装
External SUS#304 stainless steel plate + Trituration Coating
内部材质 SUS#304不锈钢板
Internal SUS#304 stainless steel plate
隔热材质 PU及隔热棉
Insulation PU & Fiberglass wool
Systems 系统结构 循环系统 多翼式循环风扇
Circulation Siroco fan
加热系统 SUS#304不锈钢高速电热器
Heating SUS#304 stainless steel high-speed heater
加湿方式 表面蒸发方式
Humidifying Surface evaporating system
冷却系统 欧美原装压缩机+鳍片式蒸发器+气冷式冷凝器
Cooling Airtight compressor + evaporator fins +air-cooling condenser
除湿方式 ADP临界路露点冷却除湿方式
Dehumiditying ADP Critical dewpoint cooling/dehumiditying method
控制系统 TEMI
其他配件 多层强化玻璃视窗、测试孔(¢50MM)、动作指示灯、箱内照明、隔层置物架(两个)
Other components Vacuum glass inspection window, cable port(¢50mm), control status indicator lights, chamber lamp, experiment separation shelves(freely adjustable 2 pcs).
安全装置 电路系统负载保护、压缩机负载堡护、控制系统负载保护、加湿系统负载保护、超温负载保护、故障警示灯
Savety devices Overheating prevention circuit-breaker, compressor overload protection, control system overload perevention, humiditying system overheating, drying out prevention, breakdown indicator light.
电源(AC1ф,220V,50Hz)       A 25 30 30 30 30 30 30 30 30 30 30 45 60 60 60 30 45 60 60 60
Power Source
电源(AC3ф,380V,50Hz)       A                       30 45 45 45 30 45 45 45 45
Power Source
恒温恒湿英文资料
PROGRAMMABLE TEMPERATURE & HUMIDITY CHAMBER
1.       Hight capacity programming memory
*Can store up to 99 programs,each with up to 700 segments,
 Which can be repeated up to 999 times; segments and programs
 Can be joined and separated.
*Simultaneously remembers up to 99 programs. Segments can be 
 Repeated in the middle of programs.
*Can Temp & Humi. One or many patterns of operating conditions,
 Up to 700 different settings of temperature, humidity and duration.
*Electrical failure memory is activated in power outages, to that
 Program resures when power is restored.
*Can store and indicate total elapsed time.
*Automatic self-adjustment follows temperature and humidity patterns.
2.       Convenient operation
*Microprocessor guides you step by step through the programming, 
 And signals possible programming errors.
*New settings are automatically saved in memory. Settings can be
 Stored for up to 5 years.
*Each control parameter can be controlled separately during operation,
 For example: power output, cycle countdown, rate of change,
 Or temperature, etc.
*Programs can be “locked” to prevent accidental resetting.
3.       Special Control Functions
*The rate of temperature change can be preset in the program.
*A Timer signal output relay enables results from every step of the 
 Process to be conveyed to all necessary peripheral devices.
*All heating, cooling, humidifying and dehumidifying elements are
 Controlled by a microprocessor which executes all temperature and
 Humidity commands.
 Option
*Through RS232C serial ports, computers can be attached for control
 And information management.
*An automatic temperature and humidity recording device can be
 Connected to increase the reliability of the test.
*The control unit may be physically separated from the testing
Bitmap
 Chamber for remote control operation.
   
     
Mode TH-1P- TH-2P- TH-3P- TH-4P-
Inter Dim.W×H×D(cm) 40×50×40 45×60×45 50×75×60 100×100×80
External Dim.W×H×D(cm) 92×130×70 97×140×75 102×155×90 152×180×110
Temp. Range -70℃~100℃(+150℃)(A:0℃ B:-20℃ C:-40℃ D:-60℃ E:-70℃
*RelativeHumildity Range 20%~98%R.H.
Features Temp. & huml.constancy ±0.3℃;±2.5%
Temp. & humi. uniformity ±0.5℃; ±4%R.H.
Indication resolution 0.1℃;0.1%R.H./0.01℃;0.1%R.H.
Heat-up time (min.) About 30 to 50
Pull-down time (min.) About 45 to 120
Material Exterior SUS#304 stainless steel plate
Interior SUS#304 stainless steel plate
Insulation PU & Fiberglass wool
Systems Circulation Siroco fan
Heating SUS#304 stainless steel high-speed heater
Humidifying Surface evaporating system
Cooling Airtight compressor+evaporator fins+air-cooling condenser
Dehumidifying ADP Critical dewpoint cooling/dehumidifying method
Control Digital electronic indicators, programmable computer controller+S.S.R.
Other components Vacuum glass inspection window, cable p:ort(Φ35mm),control status indicator lights, chamber lamp, experiment separation shelves (freely adjustable 2 pcs).
Savety devices Overheating prevention circuit-breaker,compressor overload protection, control system overload prevention, humidifying system overheating and drying out prevention, breakdown indicator light.
Power source AC 1Φ/3Φ,220V±10%,50/60HZ.
恒温恒湿 恒温恒湿试验机 恒温箱 恒温恒湿箱 恒温恒湿机 恒温恒湿试验箱 LED专用恒温恒湿机
 

上一篇:没有了!  下一篇恒温恒湿试验箱